Our cupboard system has been designed by us to be both functional and stylish, while still providing the maximum storage space using the best possible materials. We also fit upper lockers above the cooker and rear seat as standard. with soft close on all doors for noise reduction and a quality feel:

1. Four 8×4 sheets of lightweight furniture ply (Moorland , Decalan, or Moorland lightweight ply).
2. One 28mm black granite effect worktop.
3. Nine bespoke hand made cupboard doors with signature silver edging.
4. 2.5m of 1 1/4 inch continuous hinge for the upper lockers.
5. Four 110 degree concealed hinges.
6. Two 160 degree concealed hinges for the front wardrobe door.
7. Thirteen brushed nickel plated push button door latches
8. Eleven metres of silver knock in edging (only used on high impact areas for durability)
9. Thirty five metres of silver iron on edge trim to seal and protect the wood.
10. 500mm of silver gallery rail.
11. Two 450mm soft close ball bearing draw runners.
12. Nine wurth soft close door pins
13. Four sprung door lid stays for upper lockers
14. One table rail and foldaway table leg
15. Splash back as standard

All our camper vans come with an LPG approved gas locker that are fully inspected by an external gas engineer. We have also incorporated an internal 20 liter water tank that is filled from the rear, new for 2016!

1. SMEV 8822 sink 2 ring cooker unit
2. 3 metres of 8 mm gas pipe
3. 1 x gas shut off valve
4. 1 x gas test T
5. 1 x gas regulator
6. 1 x flexi gas bottle connector pipe
7. 1 x gas bottle strap
8. 4 x gas drop vents
9. 1 x 8 mm gas pipe connector
10. Fire extinguisher
11. Taylor made gas locker
12. 20 litre water tank with water pump
13. Water tap
14. Water fill point
15. Water drain point
16. Hose clip
17. 900 mm x 40 mm diameter water pipe
18. 1850 mm x 10 mm diameter water pipe

We feel that safety is a key factor and will only fit crash tested rear seats as standard in all our VW camper conversions. We fit STIDE sliding seat system 3 seat with isofix rear seats and we are one of the UK fitters.

In this conversion the rear seat comes standard with integral head rest and a foxed base to maximize bed length and boot storage in this SWB camper van. It comes as standard in this VW T7 Transporter/V710 Ford cloth unless you request another materials (ie. leather, faux suede, or a cloth of your choice) there are many options including coloured stitching and embroidery.

1. STIDE sliding seat system with isofix [seats three]
2. Integral head rests
3. Boxed base
4. Rear seat belts

All seats come pre-assembled from the factory with the seat belt already fitted.

The front passenger seat is converted into a swivel seat (single or double).